Audio Technica ATM350D Instrument Mic with Drum Mounting System
Key Features
- Ensure perfect mic placement with flexible gooseneck
- Remove low end build up with switchable 80Hz HPF
- Cardioid polar pattern provides tight, focused sound
- Ideal for video sessions and live performance thanks to low profile mic design
Audio Technica ATM350D Instrument Mic with Drum Mounting System Overview
Ideal for drums. The Audio Technica ATM350D Instrument Mic kit is the ultimate choice for any engineer and performer. The kit includes a premium quality ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount and 5" gooseneck as well as a hook and loop drum mount.
The ATM350D is just as comfortable on-the-road as it is in the studio. Thanks to its cardioid polar pattern you can ensure a tight, focused sound with excellent off axis rejection. Get the sound right at source. The ATM350D includes a switchable high-pass filter, allowing you to reduce low end rumble and other unnecessary frequencies. This will save you time later at the mixing stage. If you're serious about high-quality capture then look no further than the ATM350D by Audio-Technica.
Product Ref: 105563
Full Description
View Full DescriptionFeatures
- Low-profile microphone design provides unobtrusive mounting with minimal visibility
- Crisp, clear, and well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, providing excellent isolation of your desired sound source
- UniMount drum mount features a unique spring-loaded mechanism that attaches securely to a drum lug, whilst providing excellent shock resistance for the microphone
- Rugged UniMount 5'' gooseneck rigidly holds its shape, maintaining accurate microphone positioning, even during aggressive play
- In-line power module is equipped with a switchable 80Hz high-pass filter for controlling undesirable low-frequency ambient noise
- Optional interchangeable elements available for hypercardioid and omnidirectional polar patterns (not included in this kit, must be purchased separately)
- Included Drum mount with hook-and-loop fastener for additional mounting options
Specifications
- Microphone Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40Hz to 20kHz
- Low Frequency Roll-Off: 80Hz, 12dB/Oct
- Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
- Impedance: 200 Ohms
- Maximum Input Sound Level: 159dB SPL, 1kHz at 1 percent THD
- Dynamic Range (Typical): 130dB, 1kHz at max. SPL
- Signal-To-Noise Ratio: 65dB, 1kHz at 1Pa
- Phantom Power Requirements: 11 - 52V DC, 3.5mA typical
- Switch: Flat, Roll-Off
- Microphone Weight: 14.5g / 0.5oz.
- Microphone Dimensions:
- 37.8mm / 1.49'' long
- 12.2mm / 0.48'' max. body diameter
- Power Module Weight: 90g / 3.2oz.
- Power Module Dimensions:
- 92mm / 3.62'' long
- 18.9mm / 0.74'' diameter
- Power Module Output Connector: Integral 3-pin XLRM-type
- Cable: 4.0m / 13.1ft long (permanently attached to microphone, 3.2mm / 0.13'' diameter, 2-conductor shielded cable with HIROSE HR10-type connector
- Optional Interchangeable Elements:
- UE-H Hypercardioid (Not Included)
- UE-O Omnidirectional (Not Included)
- Included Accessories:
- ATM350a Cardioid Condenser Microphone
- AT8543 Power Module
- AT8491D UniMount Drum Mount
- AT8490 UniMount 5'' Gooseneck
- AT8468 Drum Mount (Hook-and-Loop Fastener)
- Protective Carry-Case
- Product Code: ATM350D