DISC JBL EON15 G2 Active PA Speakers (Pair)

Detaljeret Beskrivelse

The JBL EON15 G2 delivers 300 watts of power to a 15-inch Neodymium Differential Drive low frequency driver. The driver boasts a dual neodymium magnet and dual voice coil motor that delivers high output and low distortion from a lightweight woofer. Meanwhile, the high frequency amplifier delivers 100 watts of power to a 1.75" titanium diaphragm compression driver with ferro-fluid cooling.

The EON15 G2 is at home as a main PA or on stage as a monitor or instrument amplification system. Musicians who own an EON speaker can use them singly for casual solo or duo work, or combine multiple EONs into a complete, powerful PA system.

Instrumentalists will appreciate the expanded input capabilities of the EON15 G2. With its integral three-input mixer, the EON15 G2 can directly accommodate electronic keyboards, drum machines, electrified acoustic guitars, and microphones. Electric guitarists using the new generation of amplifier modeling modules will find that the clean, full-range sound of EON15 G2 reproduces all of the subtle tones the modules can produce. The new "MIX OUT" feature even provides an output from the internal mixer that can be sent to the main PA, making the EON15 G2 the ideal choice for keyboard or acoustic guitar amplification.

Specifications:

Freq. Range (-10 dB): 39 Hz - 18 kHz

Freq. Response (±3 dB): 42 Hz - 17 kHz

Horz. Coverage (-6 dB): 90° Nominal

Vert. Coverage (-6 dB): 60° Nominal

Rated Maximum SPL: 129 dB,@ 1 m (3.3 ft)

Dimensions (H x W x D): 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)

Net Weight: 21 kg (46 lbs.)

LF Driver: Integral frame with one 15½ (380 mm) driver, dual

neodymium magnet, 2½ differential drive voice-coil.

HF Driver: JBL 2418H-1 1½ (throat diameter) compression

driver with 1.75½ diameter titanium diaphragm.

Ferro-fluid cooled.

Amplifier Power LF: 300 watts @ low-frequency driver impedance.

Amplifier Power HF: 100 watts @ high-frequency driver impedance.

Input 1 Sensitivity: -44 dBu to -22 dBu for rated output (Mic/Line switch

in MIC position)

-12 dBu to +20 dBu for rated output (Mic/Line switch

in LINE position)

Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for rated output

Output Level: +20 dBu (peak), Loop/Mix switch in MIX position

Audio Connectors:

�Input 1: XLR/F, balanced

�Input 2 & 3: 1/4½ Phone, balanced (TRS)

Crossover Freq: 1.5 kHz

Limiting: Low frequency amplifier controlled by dynamic filter

Loop/Mix Out: XLR/M, balanced

EQ: High Frequency Shelving, ±15 dB @ 5 kHz

Low Frequency Shelving, ±15 dB @ 120 Hz.

AC Input: 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL,

detachable IEC power cable