DISC ENGL Special Edition E670 6L6 Guitar Amplifier Head

View PDF
This product is currently not available for purchase

Key Features

  • ECC83 & 6L6GC Tubes Delivers 50/100W Of Pure Tone
  • Offers Hi Power (100 Watts) & Low Power (50 Watts)
  • Features Clean, Crunch, Lead I, & Lead II Channels
  • Wide Range Of Controls Provide Excellent Tone Shaping
  • Extensive Ins/Outs Provide Excellent Connectivity With Rigs

DISC ENGL Special Edition E670 6L6 Guitar Amplifier Head Overview

View this description in Danish

The ENGL Special Edition E670 Guitar Amplifier Head is designed as the ultimate amp, offering an incredible range of tonal possibilities suited for the playing style of any ambitious guitarist. Featuring 4 channels to choose from and a plethora of tone shaping controls, the E670 amp head provides both 50 watts and 100 watts of tonal power perfect for any stage setting. Go from crystal clean and smooth jazz, to fat metal punch and screaming leads, and everything in-between. A selection of outputs offer easy connection to existing rigs, and direct input into mixers and recording devices. The Special Edition E670 Amp Head can be controlled by footswitches and MIDI controllers making it perfect for stage and studio.

Product Ref: 92115

Full Description

View Full Description

Delivers 50 & 100 Watts of Power

The ENGL Special Edition Amp Head features a switchable output for extra versatility, offering 50 watts and 100 watts of pure tonal power. Four 6L6GC tubes provide the amp with its immense power, using all 4 to deliver 100 watts and only 2 for the low 50-watt power. Even with its incredible output, 50 watts is more than enough for most stage settings and is perfect for players wanting to add a classic power amp distortion to spice up their sound. Using the E670’s 100-watt setting is perfect for players who prefer exploring the massive dynamic range of the power amps, offering plenty of headroom for players to enjoy.

Powerful Tonal Capabilities

Not only does the E670 Amp Head offer incredible power, its extensive range of controls ensures players can achieve the perfect tone for their playing style. Use the modern/classic button to change the basic tonal character of the amp’s voices, with modern offering a lead dynamic response while classic provides a vintage-tube tone. The tube driver enhances the dynamic range of the input signal, and can be used as an independent fifth preamp channel with EQ capabilities. The amp is also equipped with an onboard spring reverb system, a depth boost to beef up the bottom end by 6dB, a mega low punch button to boost low end frequencies, and a noise gate to help suppress excess noise.

Clean & Crunch Channels

Featured on main channel 1 are the clean and crunch channels, with separate gain, treble, and volume knobs for excellent control. The gain boost helps boost the input sensitivity of the two channels, extending the gain ranges for further tone shaping or as a volume booster for the clean channel. The normal bright button boosts the upper end of the high frequency range, providing a crisp, glassy tone perfect for brightening humbuckers and muddy pickups. The ultra bright button boosts the low end of the high frequency range, increasing twang factor and adding a sonic horn to instruments that may be lacking.

Lead I & Lead II Channels

Featured on main channel 2 are the lead I and Lead II channels, with separate gain, treble, and volume knobs for excellent control. Hi Gain increases the input sensitivity of the 2 channels, switching from a soft lead, which is perfect for high output pickups and chugging rhythm riffs, to a heavy lead perfect for scorching ultra-high gain lead sounds with lots of sustain. The contour active button shapes the midrange frequencies, boosting the mids from 300Hz to 600Hz, while the mid edge button slightly lowers the mid knobs frequency spectrum, smoothing out any rough edges.

Features

  • 4 basic channels to choose from; clean, crunch, lead I, and lead II
  • Tube driver circuit is used for effect devices, and can also be used as a 5th channel
  • All 4 channels have access to a 3-band EQ with independent treble controls
  • Modern and classic sound shaping button offers different a voice for each channel
  • Range of tone shaping controls for finding the perfect sound for any playing style
  • 3 separate FX loops for connecting wide range of effects and devices
  • Switchable power output, between 50 watts and 100 watts
  • XLR line output allows connection to external studio gear
  • Footswitch inputs for connecting the custom Z-9 footswitch, or dual footswitch
  • Features 5 x ECC83 tubes and 4 x 6L6GC Tubes
  • Made in Germany

Specifications

General

  • Channels: Clean, Crunch, Lead I, Lead II
  • Power: 100 Watts, 50 Watts @ 4, 8, & 16 Ohms
  • Power Amp Tubes: 4 x 6L6GC
  • Preamp Tubes: 5 x ECC83
  • Logic Control System: AT89C52 µC w/Internal 8K Flash Memory
  • Memory: EEPROM 93C66
  • MIDI: Asynchronous Data Protocol

Controls

  • Knobs: 4 x Gain, 2 x Bass, 2 x Mid, 4 x Treble, 2 x Reverb, 4 x Volume, 2 x Presence, 2 x Master
  • Buttons: Tube Drive, T.D. E.Q., Gain Boost, Hi Gain, Normal Bright, Ultra Bright, Contour Active, Mid Edge, Presence A/B, Depth Boost, Mega Lo Punch, Reverb Active, FX Loop I/II, Serial FX Loop, Master A/B, Modern/Classic, Lo POW/Hi POW, Speaker A/B, Noise Gate, Write/Copy
  • Noise Gate: Mute Depth, Threshold Level
  • Tube Driver: Level, Contour, Bass, Mid, Treble, Sensitivity
  • FX Loops: 2 x Balance
  • Line Out: Level, Line Out Status, XLR Ground
  • Power Amp Output: 2 x Impedance Selector

Connections

  • Input: 1/4” Guitar Jack
  • Input Sensitivity: From -20 dB, Nominal, Max. 0 dB
  • Outputs: 4 x 1/4" Preamp Output, Line Out Balanced & Freq.-Comp. XLR
  • Output Level:
    • Send, Level Range: From -20 dB, Nominal, Max. 0 dB
    • Freq.Comp. Line Out: +6 dB Max.
  • Impedance Test & Cable Check System: 2 x 1/4" Jack (Cable Return & Test Jack)
  • FX Loop: 3 x 1/4” Jack (Send), 3 x 1/4" Jack (Return)
  • Footswitches: 2 x 1/4" Jack (Serial Amp Control Power & CH 1/CH 2, SUB I/Sub II)
  • MIDI: MIDI Thru, MIDI In

Power Requirements

  • Consumption: 390 Watts Max
  • External Fuses:
    • 2 ATL (2 Amps Slo-Blo) @ 230/240 Mains Voltage
    • 4 ATL (4 Amps Slo-Blo) @ 100/115/120 Mains Voltage
  • Internal Fuses: 2 x 2.5 ALT (2 Amps Slo-Blo)

Dimensions

  • Length: 71 cm
  • Height: 28 cm
  • Depth: 29 cm
  • Weight: 26 kg